Skip to Main Content


RND Cap Nut

Pre Pierce and Form Rivet
  • SizeMeasurement
  • Size: M6Measurement: 0.80mm - 3.00mm
  • Size: M8Measurement: 0.80mm - 3.00mm
  • Size: M10Measurement: 1.00mm - 3.50mm
  • Size: M12Measurement: 1.60mm - 3.50mm


RND Rivet nuts with cap for high torque conditions

Application Area

  • Available in thread sizes from M5 to M12
  • Can be universally used for component thicknesses from 0.8 to 3.0 mm and tensile strengths of up to 1200 MPa.
  • Suitable for lateral forces
  • Corrosion resistant in accordance with customer requirements
  • No component material thinning during the riveting process
  • No adverse effects on the joint or function of the thread; no damage due to weld spatters
  • For use with surface-treated, galvanized or painted components
  • Water-tight and gas-tight in reference to the requirements demanded by the automotive sector, no extra-sealing or O-ring required
  • High resistance to twist and ejection forces, even for thin sheet metals
  • Cap protects against penetration of various substances, dust, paint, KTL coating

Processing Steps