Skip to Main Content

Products

RND Light


Pre Pierce and Form Rivet
  • SizeMeasurement
  • Size: M6Measurement: 0.60mm - 2.50mm
  • Size: M8Measurement: 0.80mm - 3.00mm
  • Size: M10Measurement: 1.00mm - 3.00mm

Overview

RND Light rivet nuts for high torques, light and space-efficient

Application Area

  • These rivet nuts can be universally used for component thicknesses from 0.6 to 3.0 mm and tensile strengths of up to 1200 MPa
  • Suitable for a wide range of high dynamic, static and impact load conditions
  • Suitable for use where threaded fittings need to be resistant to high axial forces
  • Also suitable for the accommodation of lateral forces
  • Can be used for aluminum through press hardened steel
  • Suitable for use with surface-treated, galvanized or painted components
  • Optimized in terms of weight and costs as compared to the RND™ (standard)

Technical Characteristics

  • Thread sizes: M6 to M10
  • P.C. 8 (standard)
  • Resistance to corrosion in accordance with the customer’s requirements
  • No component material thinning during riveting process
  • No adverse effects on the joint or function of the thread; no damage due to weld spatters
  • High resistance to twist and ejection forces, even for thin sheet metals
  • Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
  • Nut positioning tolerance ranges can be halved as compared to welding methods
  • Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests
  • Can withstand high loads on both sides

Processing Steps