Specifications
| Size | Measurement |
|---|
| M5 | 0.80mm - 3.00mm |
|---|
| M6 | 0.80mm - 3.00mm |
|---|
| M8 | 0.80mm - 3.50mm |
|---|
Application area
- Round rivet nuts require little space
- Can be universally used for component thicknesses from 0.8 to 4.0 mm and tensile strengths of up to 1200 MPa
- Suitable for a wide range of high dynamic, static and impact load conditions
- Suitable for use where threaded fittings need to be resistant to high axial forces
- Also suitable for the accommodation of lateral forces
- Can be used for GRP, CFRP, aluminum or other materials
- Suitable for use with surface-treated, galvanized or painted components
- Available as cap nut on request
Technical characteristics
- Thread sizes: M6 to M14
- P.C. 8 (standard)
- Resistance to corrosion in accordance with the customer’s requirements
- No component material thinning during riveting process
- No adverse effects on the joint or function of the thread; no damage due to weld spatters
- High resistance to twist and ejection forces, even for thin sheet metals
- Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
- Nut positioning tolerance ranges can be halved as compared to welding methods
- Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests
Specifications
| Size | Measurement |
|---|
| M5 | 0.80mm - 3.00mm |
|---|
| M6 | 0.80mm - 3.00mm |
|---|
| M8 | 0.80mm - 3.50mm |
|---|
