Skip to Main Content



Self Pierce
  • SizeMeasurement
  • Size: M5Measurement: 0,6 mm - 2,4 mm
  • Size: M6Measurement: 0,6 mm - 2,4 mm
  • Size: M8Measurement: 0,6 mm - 2,4 mm
  • Size: M10Measurement: 1,0 mm - 2,4 mm


Application Area

  • The SMA Nut can be used in component thicknesses from 0.6 mm to 2.4 mm
  • Maximum material strength of the component up to approx. 500 MPa (depending on the thickness of the sheet, higher strengths with thinner materials possible)
  • Compliant with DIN EN ISO 898-2:2012-08
  • Single-stage processing without pre-hole operation
  • Can be used in components made of steel or light metals
  • Suitable for a wide range of high dynamic, static and cyclic loads

Technical Characteristics

  • Thread sizes from M5 to M10
  • P.C. 10 (standard)
  • Excellent mechanical bonding properties even when used in low component thicknesses
  • Excellent tightness properties (>> IP67 depending on the component thickness and the material quality)
  • Resistance to corrosion in accordance with the customer´s requirements
  • Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests
  • No adverse effects on the joint or function of the thread; no damage due to weld spatters

Processing Steps