Skip to Main Content


RSN Cap Nut

Pre Pierce and Form Rivet
  • SizeMeasurement
  • Size: M5Measurement: 0.80mm - 2.00mm
  • Size: M6Measurement: 0.80mm - 2.00mm
  • Size: M8Measurement: 0.80mm - 2.50mm
  • Size: M10Measurement: 1.00mm - 2.00mm
  • Size: M12Measurement: 0.80mm - 2.00mm
  • Size: M14Measurement: 1.00mm- 2.00mm


RSN Rivet nuts with cap for high torques, light and space-efficient

Application area

  • The RSN™ cap nut is an addition to the RSN™ standard.
  • Available in thread sizes from M5 to M14 can be universally used for component thicknesses from 0.8 to 2.0 mm and tensile strengths of up to 800 MPa
  • Also suitable for the accommodation of lateral forces
  • Resistance to corrosion in accordance with the customer’s requirements
  • No component material thinning during riveting process
  • No adverse effects on the joint or function of the thread; no damage due to weld spatters
  • Pure mechanical attachment
  • Suitable for use with surface-treated, galvanized or painted components
  • Water-tight and gas-tight in reference to the requirements demanded by the automotive sector, no extra-sealing or O-ring required
  • High resistance to twist and ejection forces, even for thin sheet metals
  • The cap protects against penetration of various substances, dust, paint, KTL

Processing Steps